More results...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

METALHAFTGRUND 550

Premium quality anti corrosive liner with special zinc additives for corrosion protection of metals and rap-id drying.


.

Characteristics

  • Without lead and chromium
  • Corrosion protection
  • Excellent coverage
  • Very good filling properties
  • Perfect workability and levelling
  • White, black, grey and reddish
  • Strong bonding, high elasticity and rapid drying

Recommendations for use

It is recommended to be used as a liner on all metal surfaces that are intended for indoor and outdoor use. It is used for painting metal constructions that are intended for use in industrial environments, such as workshops, bridges, stairs, etc.

APPLICATION PROCEDURE

Surface preparation

Clean the surface of the damaged old paint without seams and the rusted parts by grinding the surface. By washing process, eliminate all the dust generated by the grinding process as well as other elements that hinder adhesion such as grease, oils, etc.

Product preparation

Initially, dilute the product using the appropriate solvent up to the suitable application viscosity. It is recommended that the solvent mixture be mixed using an electric mixer.

Application

Application of the product MetalhaftGrund 550 is made by an air pistol, brush or roller. First, pour the prepared product into the container. Then, with the pistol, the product is spread on the metal surface. The application is done by applying two consecutive coatings in order to achieve the best coverage of the metal surface. Make sure that the appropriate thickness of the coating is obtained in order to achieve maximum metal protection.

Storage

36 months, provided that the cans are closed and in normal storage conditions.

Technical data

Resin:   Alkyd resin  
Density EN ISO 2811-1:   1,45+0,02 gr/ml  
Dry residue EN ISO 3251:   75%  
Dilution degree:   10-20%  
Viscosity:   115±5 KU  
Drying time:   2-4 hours Also depending on environ-ment conditions and diluent used.  
Time for repainting:   6-8 hours Also depending on environment conditions and diluent used.  
VOC in the ready product (European Directive 2004/42/CE) (g/l):   ≤ 100  
TVOC ambient emissions, Simulation chamber ISO 16000-9 (mg/m³)   ≥ 20  

Notes

It is recommended to avoid the application of product in temperatures below 5°C.

Packaging

0.75lt/3lt drums