More results...

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TECNOFLOOR 30

Self-leveler with high content of cement and modified additives.


.

DESCRIPTION

TECNOFLOOR 30 is a cement-based self-leveler, with modified additives, which is used to lay and level floors. It is classified as CT - C40
- F10 - AR2 according to EN 13813 standard.

Preparation of support

The support should be clean, free of dust, loose particles, oils, varnish- es, etc. First, treat the support with the acrylic primer HYDROPRIMER. TECNOFLOR 30 product is applied after complete drainage of the prim- er, approximately two hours after the application of HYDROPRIMER. Primer consumption: 200 - 300g/m2.

Application of product

TECNOFLOOR 30 is gradually added in a quantity of water about 6,0 - 6,5L, by continuously stirring it, until a homogeneous and fluid mixture is formed. The mixture is left to settle for 3 minutes, and then is stirred again. TECNOFLOOR 30 is cast in a single layer on the surface which has been treated with primer beforehand, until the desired thickness is achieved. Once the product is leveled, run a toothed roller onto it in order to take out the air within the formed mixture. Application temperature should be between +5°C and +35°C.

STORAGE

12 months from manufacture date if stored in its original and unopened packaging. Protect it from direct exposure to the sun and from frost.

Technical data

Form Powder
Color Grey
The amount of water for hydration 5,5-6,0 l / 25 kg bag
Volumetric weight of the powder  product                                                                                                     1,40 ±0.10 kg/l
Volume weight of fresh mortar 2,10 ±0,20 kg/l
Compression strength 40.00 ±3.50 N/mm2
Flexural strength 10.00 ± 1.00 N/mm2
Adhesion strength > 2.0 N/mm2
Shrinkage 0,29 ±0,10 mm/m
Pot life of hydrated product 45-60 min at +20oC

Consumption

Approx. 1.5 kg/m2 for mm layer thickness.

Packaging

TECNOFLOOR 30 is packed in sacks of 25 Kg