Description
Characteristics
- Whiteness and twinkling
- Finished surface matt
- Very good covering
- It is available in 4 basis W, P, D and TR
- Excellent workability and levelling
- Very strong adhesion and rapid drying
- High resistance to frequent washings
- Supports 14000 washing cycles 30 days after
Recommendations for use
Used on all walls and ceilings of any kind of interior, bedroom, toilet, living rooms, office spaces, services etc.
APPLICATION PROCEDURE
Surface preparation
The surfaces should be completely dry, clean and free from dust and elements that hinder the adhesion of the paint. Repair all cracks and damaged parts using the line products of Deutschcolor, Natur Kalk, Vox 707, Glatte Spachtel, Spachtel Finish, etc. Then, it is recommended to apply the Macht Tiefgrund Wasser liner, diluted with 1:1 water or a water-diluted Macht Haftgrund liner at 1:3 ratio. When applying the liner, avoid creating a film, which then creates problems connecting the paint to the support.
Product preparation
Dilute the product Picasso Classic VN-35 with 10-15% water, except for bases D and TR which are recommended to be diluted with not more than 5% water. Use a low speed electric mixer to make the mixture as uniform and complete as possible.
Application
Application of the product Picasso Classic VN-35 is made with a brush or roller. The application cycle includes at least the application of two coatings of paint. The time needed between the two coatings is 2-4 hours depending on weather conditions, temperature and humidity. Clean brushes, rollers and other working tools with water before the paint dries.
Storage
36 months if stored in a dry place, away from heat sources, at a temperature between +5?C and +30?C. Protect it from frost.
Technical data
| Resin: | PVA VEOVA Polymer |
| Density EN ISO 2811 ? 1: | 1,45?0,02 gr/ml |
| Dry residue EN ISO 3251: | 65% |
| Dilution degree: | 10-15% |
| Viscosity: | 110?5 KU |
| Drying time between two coatings: | 4-6 hours |
| VOC in the ready product (European Directive 2004/42/CE) (g/l) | ? 10 |
| TVOC ambient emissions, Simulation chamber ISO 16000 ? 9 (mg/m?): | ?0.2 |
| Covering ability EN ISO 56504 ? 3 | > 98% Class II |
| Washing resistance ISO 11998: | Class I |
Notes
It is recommended not to wash the painted surfaces until 30 days after application.
In fresh concrete surfaces the product should be applied at least after 30-40 days.
Consumption
9-10 m?/It (two coats)
Packaging
1lt/3lt/10lt plastic buckets.
Reviews
There are no reviews yet.